Project

General

Profile

Help About MessagingToolkitCore

Added by admin almost 3 years ago

The problem is:
EventOutGoingCall not function when OutgoingCallEventHandler feature has been activated. In other words, when making outgoing calls, no information call progress or status information when a call has been received by the destination number.
When a call out, and wanted to cancel the call (hangup), the system responds very slowly. Calls may still continue to do after they were sent hangup command. Then I tried to use the command "ATH" using the "Terminal" (mobileGateway.SendCommand ("ATH" & vbCrLf), the result is the same. When the cancellation of a very long time (about 31 seconds)
This is Log Event:
2017.01.12-07.52.47: Sending: ATDXXX;
2017.01.12-07.53.18: Sending: ATH
2017.01.12-07.53.18: Response: <cr><lf>OK<cr><lf>
2017.01.12-07.53.18: Sending: AT+CHUP
2017.01.12-07.53.18: Response: <cr><lf>OK<cr><lf>

Our environment:
Device : using SIM900 or WaveComQ24 ( the result same)
Lenguage : Visual Basic 2010
OS: Windows 10


Replies (10)

RE: Help About MessagingToolkitCore - Added by admin almost 3 years ago

Hi,

Can you attach your full code snippet and log file here? At least from what I see the hang up command is executed immediately.

Thanks
Regards

RE: Help About MessagingToolkitCore - Added by atep almost 3 years ago

Thanks for your fast response.

About MyQuestion : "When a call out, and wanted to cancel the call (hangup), the system responds very slowly. Calls may still continue to do after they were sent hangup command. Then I tried to use the command "ATH" using the "Terminal" (mobileGateway.SendCommand ("ATH" & vbCrLf), the result is the same. When the cancellation of a very long time (about 31 seconds)"

I try to change:

config.CommandWaitInterval = 10<br /> config.CommandWaitRetryCount = 10

"Cancel Call Command (ATH)", have fast response now. But we don't know thats its right way?

About, 1st Question : "EventOutGoingCall not function when OutgoingCallEventHandler feature has been activated. In other words, when making outgoing calls, no information call progress or status information when a call has been received by the destination number."

The problem still not resolved. I don't see event "EventOutGoingCall".

THis is my code. Thanks.

RE: Help About MessagingToolkitCore - Added by atep almost 3 years ago

Please Delete MyAttchment.

Thanks

RE: Help About MessagingToolkitCore - Added by admin almost 3 years ago

Hi,

I see this line commented. Can you confirm if it still not working after uncommenting the line?

'AddHandler mobileGateway.CallDialled, New OutgoingCallEventHandler(AddressOf OnCallDialled)

Thanks
Regards

RE: Help About MessagingToolkitCore - Added by atep almost 3 years ago

Helo,

Off Course i try uncomment 'AddHandler mobileGateway.CallDialled, New OutgoingCallEventHandler(AddressOf OnCallDialled)

But not work. OutgoingCallEventHandler Still not work.

Thanks

RE: Help About MessagingToolkitCore - Added by atep almost 3 years ago

Sory,

Is there any indication (using OutgoingCallEventHandler) when the receiver accept the call?

Thanks

RE: Help About MessagingToolkitCore - Added by atep almost 3 years ago

i try again,
then i have another event log, like this:

2017.01.12-02.56.02: Sending: ATD085793001974;
2017.01.12-02.56.02: Response: <cr><lf>OK<cr><lf>
2017.01.12-02.56.02: Firing async CallDialled event.
2017.01.12-02.56.04: Ending async OutgoingCallEventHandler call
2017.01.12-02.57.25: Sending watch dog message
2017.01.12-02.57.25: Sending: AT
2017.01.12-02.57.25: Response: <cr><lf>NO CARRIER<cr><lf><cr><lf>OK<cr><lf>
2017.01.12-02.58.25: Sending watch dog message
2017.01.12-02.58.25: Sending: AT
2017.01.12-02.58.25: Response: <cr><lf>NO CARRIER<cr><lf><cr><lf>OK<cr><lf>
2017.01.12-02.59.25: Sending watch dog message
2017.01.12-02.59.25: Sending: AT
2017.01.12-02.59.25: Response: <cr><lf>OK<cr><lf>

RE: Help About MessagingToolkitCore - Added by admin almost 3 years ago

Hi,

Can you put a breakpoint in this procedure?

Private Sub OnCallDialled(sender As Object, e As OutgoingCallEventArgs)
txtOutgoingCallEvent.BeginInvoke(_displayCallEventLog, e)
End Sub

From the log file, the event is triggered.

Thanks
Regards

RE: Help About MessagingToolkitCore - Added by atep almost 3 years ago

Helo Sir.

We still not lucky abou call/dial progress monitor.

BTW. We try to monitor Call/Dialout progress, then send Command AT+CLCC=1 to our SIM900 GSM Module

Using, hyper terminal we can get call progress like this one :

Ring Progress : +CLCC: 1,0,3,0,0,"085793001974",129,""
Accepted CAll : +CLCC: 1,0,0,0,0,"085793001974",129,""
Reject Call : +CLCC: 1,0,6,0,0,"085793001974",129,""

How to monitor this call progress using MessagingTolkitCore.

Thanks.

RE: Help About MessagingToolkitCore - Added by admin almost 3 years ago

Hi,

The library currently does not support +CLCC command. As workaround you can send the AT command through the library and parse the result. We will add this to the next version.

Thanks
Regards
admin

    (1-10/10)