Project

General

Profile

Activity

From 06/08/2012 to 07/07/2012

07/07/2012

03:19 AM Support: RE: router
Hi,
This feature is available. You can refer to the BulkGateway sample source code. You can set the prefix through...
admin
06:57 PM Support: router
Hi,
I have some GSM for differnce operators.
I want when I send a message to a number router automatically send via...
omoridi

07/06/2012

03:57 PM Support: RE: Check if device is still active
Hi,
Try setting config.WatchDogInterval to a shorter period and see if it helps, e.g....
admin
10:13 AM Support: RE: Check if device is still active
What more, if gsm modem is removed while connected, there is no way to connect again: requested resource is in use. lucase
07:16 AM Support: RE: Check if device is still active
Hello,
I've tried watchdog, but after 1 minute nothing happened. What interval is set for watchdog?
Testing meth...
lucase

07/05/2012

01:19 PM Support: RE: Remove Operator Selection command from initialisation string
Hi,
Thanks for pointing out the error. We will fix this in upcoming release.
Thanks
Regards
admin
admin
09:20 AM Support: RE: Remove Operator Selection command from initialisation string
Hi,
I applied the patch and set the config setting: _config.SkipOperatorSelection = true_; as you suggested and fo...
mhimschoot
04:10 AM Support: RE: Remove Operator Selection command from initialisation string
Hi,
Sorry for the late reply.
Please use the attach patch. You can turn off operation selection by doing
con...
admin
05:16 AM Support: RE: Check if device is still active
Hi,
The library already have a watchdog that sends a heart beat check to the modem at periodic internal. You can t...
admin

07/04/2012

04:08 PM Support: Check if device is still active
Dear support,
I'm trying to implement requirement that application is going to check after specified interval if c...
lucase

07/02/2012

09:07 AM Support: Remove Operator Selection command from initialisation string
When I initialise a coms port the followinf commands are sent to the modem:
_2012.05.04-02.03.30: Sending: ATZ
20...
mhimschoot

06/22/2012

03:44 AM Support: RE: Unsolicited result code
Hi,
Can you check in Device Manager if there are any differences in the port settings for the 2 modems? From what ...
admin

06/21/2012

06:54 AM Support: Unsolicited result code
Dear Admin, (please forgive my bad english)
Recently I've bought your sms library and everithing is going well: a re...
maddoc65

06/12/2012

08:00 AM Support: RE: How to detect call is connected
Hi,
Please try with the attached patch.
In your code, do
mobileGateway.EnableCOLP();
To enable connected ...
admin
07:58 AM Support: How to detect call is connected
Hi admin,
I'm using message gateway to call another mobile by using:
mobileGateway.Dial("some number");
I's work...
admin
 

Also available in: Atom