Project

General

Profile

Activity

From 06/13/2012 to 07/12/2012

07/12/2012

01:47 PM Support: RE: Check if device is still active
and last but not least,
I think, that HUAWEI driver was able to hold some requests sent by test aplication, becaus...
lucase
01:43 PM Support: RE: Check if device is still active
For Qualcomm GOBI
I've written application which is sending AT command (but this is not crucial). At first I've comm...
lucase
12:25 PM Support: RE: Check if device is still active
Another hint.
I'm running two applications: MessagingToolkit DEMO and my own, which checks if port is available:
...
lucase
12:03 PM Support: RE: Check if device is still active
Hello,
we can assume that I'm using MessagingToolkit Demo source code. There is sequence of steps that I'm using i...
lucase
03:16 AM Support: RE: Check if device is still active
Hi,
messageGateway uses SerialPort to connect to the modem, and the Dispose method releases the port by calling Se...
admin
05:31 PM Support: RE: Check if device is still active
Hello,
I've checked library and...
lucase

07/11/2012

02:33 AM Support: RE: Check if device is still active
Hi,
I have expose the Dispose method of mobile gateway. Please use the attached patch.
What you can do is that ...
admin

07/10/2012

03:18 PM Support: RE: Check if device is still active
Another test:
1. first MessagingToolkit.Core.Utilities application working + modem connected
2. modem switched off...
lucase
03:10 PM Support: RE: Check if device is still active
I've tried MessagingToolkit.Core.Utilities.exe same result: no automatic reconnection.
When I'm trying to connect a...
lucase
01:13 PM Support: RE: Check if device is still active
that seems to be the right way, but I can't get it working. It worked only once. I didn't change anything and it stop... lucase
09:28 AM Support: RE: Check if device is still active
Hi,
I am guessing that when you unplug and plug in the modem again, all the settings are reset to default. So when...
admin
08:32 AM Support: RE: Check if device is still active
Hello,
I'm using .NET version 4.0
Regards
Lucas
lucase

07/09/2012

04:13 PM Support: RE: Check if device is still active
Hi,
Are you using .NET 3.5 or 4.0?
Thanks
Regards
admin
admin
03:07 PM Support: RE: Check if device is still active
Hello again,
I've tried ...
lucase
01:35 PM Support: RE: Check if device is still active
Hi,
Try replacing
mobileGateway = messageGateway.Find(config);
with
mobileGateway = messageGateway.Send...
admin
08:04 AM Support: RE: Check if device is still active
Hello,
I've tried to set lower watchdog interval but with no effect related to WatchDogFailed event.
ValidateConn...
lucase

07/07/2012

03:19 AM Support: RE: router
Hi,
This feature is available. You can refer to the BulkGateway sample source code. You can set the prefix through...
admin
06:57 PM Support: router
Hi,
I have some GSM for differnce operators.
I want when I send a message to a number router automatically send via...
omoridi

07/06/2012

03:57 PM Support: RE: Check if device is still active
Hi,
Try setting config.WatchDogInterval to a shorter period and see if it helps, e.g....
admin
10:13 AM Support: RE: Check if device is still active
What more, if gsm modem is removed while connected, there is no way to connect again: requested resource is in use. lucase
07:16 AM Support: RE: Check if device is still active
Hello,
I've tried watchdog, but after 1 minute nothing happened. What interval is set for watchdog?
Testing meth...
lucase

07/05/2012

01:19 PM Support: RE: Remove Operator Selection command from initialisation string
Hi,
Thanks for pointing out the error. We will fix this in upcoming release.
Thanks
Regards
admin
admin
09:20 AM Support: RE: Remove Operator Selection command from initialisation string
Hi,
I applied the patch and set the config setting: _config.SkipOperatorSelection = true_; as you suggested and fo...
mhimschoot
04:10 AM Support: RE: Remove Operator Selection command from initialisation string
Hi,
Sorry for the late reply.
Please use the attach patch. You can turn off operation selection by doing
con...
admin
05:16 AM Support: RE: Check if device is still active
Hi,
The library already have a watchdog that sends a heart beat check to the modem at periodic internal. You can t...
admin

07/04/2012

04:08 PM Support: Check if device is still active
Dear support,
I'm trying to implement requirement that application is going to check after specified interval if c...
lucase

07/02/2012

09:07 AM Support: Remove Operator Selection command from initialisation string
When I initialise a coms port the followinf commands are sent to the modem:
_2012.05.04-02.03.30: Sending: ATZ
20...
mhimschoot

06/22/2012

03:44 AM Support: RE: Unsolicited result code
Hi,
Can you check in Device Manager if there are any differences in the port settings for the 2 modems? From what ...
admin

06/21/2012

06:54 AM Support: Unsolicited result code
Dear Admin, (please forgive my bad english)
Recently I've bought your sms library and everithing is going well: a re...
maddoc65
 

Also available in: Atom