Activity
From 07/07/2012 to 08/05/2012
07/24/2012
- 03:16 PM Support: RE: Check if device is still active
- Hi,
Attached is the x64 version.
Thanks
Regards
admin - 08:34 AM Support: RE: Check if device is still active
- Hello,
ok, I will stick to the patch, but could you please provide also 64 bit version?
Regards,
Lucas - 02:30 AM Support: RE: Check if device is still active
- Hi,
We will only release it early August. Meanwhile, you can use the patch attached with this thread, just do
c...
07/23/2012
- 09:19 AM Support: RE: Check if device is still active
- Hello,
could you please tell me when is it going to be possible to download patched version?
Kind regards,
Lucas
07/16/2012
- 01:31 PM Support: RE: Check if device is still active
- Yes. This will be included in the next patch.
Thanks
Regards
admin - 10:27 AM Support: RE: Check if device is still active
- Hello,
this is a major progress. When I check safe connect / safe disconnect checkbox I'm able to reconnect!
I've...
07/15/2012
- 02:33 PM Support: RE: Check if device is still active
- Hi,
Try to see if the attached patch helps.
Checked "Safe Connect" and "Safe Disconnect" in the Settings tab be...
07/14/2012
- 04:48 PM Support: RE: Check if device is still active
- I've installed eltima serial port monitor software. In attachment you will find outcome.
- 03:52 PM Support: RE: Check if device is still active
- ps. nothing unusual in logs....
- 03:51 PM Support: RE: Check if device is still active
- Hello,
I've follow the steps and in the end got the same error.
---------------------------
MessagingToolkit.C... - 05:23 AM Support: RE: Check if device is still active
- Hi,
I have tried to reproduce your problem on my side using a few modems (Huawei, Siemen Mc35i, a few handsets) bu...
07/13/2012
- 01:03 PM Support: RE: Check if device is still active
- Hello,
thank you for a quick answer, but still same error:
---------------------------
MessagingToolkit.Core.Uti... - 12:01 PM Support: RE: Check if device is still active
- Also in your program, after serialPort.Close() try to explicity call serialPort.Dispose() to see if it helps.
- 06:32 AM Support: RE: Check if device is still active
- Hi,
Can you try with the attached patch and send us back the log file? Please invoke the Dispose method before you...
07/12/2012
- 01:47 PM Support: RE: Check if device is still active
- and last but not least,
I think, that HUAWEI driver was able to hold some requests sent by test aplication, becaus... - 01:43 PM Support: RE: Check if device is still active
- For Qualcomm GOBI
I've written application which is sending AT command (but this is not crucial). At first I've comm... - 12:25 PM Support: RE: Check if device is still active
- Another hint.
I'm running two applications: MessagingToolkit DEMO and my own, which checks if port is available:
... - 12:03 PM Support: RE: Check if device is still active
- Hello,
we can assume that I'm using MessagingToolkit Demo source code. There is sequence of steps that I'm using i... - 03:16 AM Support: RE: Check if device is still active
- Hi,
messageGateway uses SerialPort to connect to the modem, and the Dispose method releases the port by calling Se... - 05:31 PM Support: RE: Check if device is still active
- Hello,
I've checked library and...
07/11/2012
- 02:33 AM Support: RE: Check if device is still active
- Hi,
I have expose the Dispose method of mobile gateway. Please use the attached patch.
What you can do is that ...
07/10/2012
- 03:18 PM Support: RE: Check if device is still active
- Another test:
1. first MessagingToolkit.Core.Utilities application working + modem connected
2. modem switched off... - 03:10 PM Support: RE: Check if device is still active
- I've tried MessagingToolkit.Core.Utilities.exe same result: no automatic reconnection.
When I'm trying to connect a... - 01:13 PM Support: RE: Check if device is still active
- that seems to be the right way, but I can't get it working. It worked only once. I didn't change anything and it stop...
- 09:28 AM Support: RE: Check if device is still active
- Hi,
I am guessing that when you unplug and plug in the modem again, all the settings are reset to default. So when... - 08:32 AM Support: RE: Check if device is still active
- Hello,
I'm using .NET version 4.0
Regards
Lucas
07/09/2012
- 04:13 PM Support: RE: Check if device is still active
- Hi,
Are you using .NET 3.5 or 4.0?
Thanks
Regards
admin - 03:07 PM Support: RE: Check if device is still active
- Hello again,
I've tried ... - 01:35 PM Support: RE: Check if device is still active
- Hi,
Try replacing
mobileGateway = messageGateway.Find(config);
with
mobileGateway = messageGateway.Send... - 08:04 AM Support: RE: Check if device is still active
- Hello,
I've tried to set lower watchdog interval but with no effect related to WatchDogFailed event.
ValidateConn...
07/07/2012
- 03:19 AM Support: RE: router
- Hi,
This feature is available. You can refer to the BulkGateway sample source code. You can set the prefix through...
Also available in: Atom