Project

General

Profile

Activity

From 09/14/2013 to 10/13/2013

10/13/2013

01:32 PM Support: RE: Only One Time Can Send SMS
I check with .net 3.5 4 4.5
with your utility
nothing happend. the first one sent but not more.
omoridi
10:51 AM Support: RE: Only One Time Can Send SMS
Hi,
When you said .NET 4 is it 4.0 or 4.5? Can you try with different binaries which are available in the "Binarie...
admin
10:18 AM Support: RE: Only One Time Can Send SMS
what does it mean how many port?
Only 1 software connect only 1 serial port
Prolific USB-to-serial convert usb to...
omoridi
01:13 AM Support: RE: Only One Time Can Send SMS
Hi,
Can you check how many port that you see for the Wavecomm modem? Is the correct port settings being used as pe...
admin

10/12/2013

02:44 PM Support: RE: Only One Time Can Send SMS
My Modem is
wavecom wismo
My vs 2012 .net 4
!http://rb.cyber165.com/images/uploads/cyber165-wavecom_1206B-2403_u...
omoridi
02:33 PM Support: Only One Time Can Send SMS
Hi,
In Version 1.7.5 .Net 4 Anycpu
After one time send sms, my GSM Hang!
and I must reset GSM Modem.
show thi...
omoridi

10/11/2013

02:23 PM Support: Enable voice in Huawei modem
To enable voice support in certain Huawei modem, e.g. Huawei 173, before calling any voice related commands, use the ... admin

10/06/2013

07:24 AM Support: RE: OnMessageFailed timeout problem
Hi,
Can you try with version 1.7.5?
Thanks
Regards
admin
admin
03:23 AM Support: RE: OnMessageFailed timeout problem
Dear Admin,
The following errors occurred while compiling the code :-
Error 1 'CommandWaitInterval' is not a me...
pradip35
01:27 AM Support: RE: OnMessageFailed timeout problem
Hi,
Try referring to the sample code. Below are 2 parameters that you can play with
// You can also...
admin
07:05 PM Support: RE: OnMessageFailed timeout problem
Sending log file pradip35
05:15 PM Support: RE: OnMessageFailed timeout problem
Hi,
Can you post the log file here?
Thanks
Regards
admin
admin
01:25 AM Support: RE: Reference number not generated on 'OnMessageFailed()' sub
Hi,
Can you check if Sms.ReferenceNo is available during OnMessageFailed?
There is also a unique identifier bei...
admin
07:06 PM Support: RE: Reference number not generated on 'OnMessageFailed()' sub
Sending log file pradip35
05:15 PM Support: RE: Reference number not generated on 'OnMessageFailed()' sub
Hi,
Can you post the log file here?
Thanks
Regards
admin
admin

10/05/2013

02:28 PM Support: Reference number not generated on 'OnMessageFailed()' sub
Reference number not generated on message sending failure. pradip35
02:24 PM Support: OnMessageFailed timeout problem
Sometimes, while sending messages when message sending fails due to certain reasons, it takes approximately 35 second... pradip35
 

Also available in: Atom